Due to current logistic instability, we are temporarily suspending international shipments for this item. We will resume international shipments as soon as the situation clears.

MEYER HYDRAULICS TRI-TASK A500 SERIES AIRCRAFT JACKS

Meyer A500 Series Aircraft Jacks have an ultra-low design that provides maximum single stage stroke while maintaining excellent stability throughout the lifting range. These Aircraft Jacks are ideal for low-slung airplanes and helicopters weighing up to 8000 lbs. (3629kg). For over 55 years Meyer Hydraulics has been recognized in the aviation industry as a top manufacturer of professional aircraft jacks. Their quality engineering and construction continues to set the standard for safe, dependable lifting at affordable prices. Your aircraft is far too valuable to consider using anything less than the best. 

A:INNER SLIDE TUBE- Safety lock-out holes are vertically spaced 1" (25mm). A 1.25" (32mm) round Jacking Point receiving socket is at the top of the Tube's anchoring stud.

B:POSITIVE SAFETY LOCK - Spring-loaded safety pin "pops" into the Inner Slide Tube to prevent the accidental lowering of the aircraft.

C:ANTI-SNAG ROUND FRAME TUBE has a 3.25" (83mm) diameter.

D:LOW-HEIGHT LEG DESIGN provides maximum gear door clearance, with one of the four sections completely free of any protrusions..

E:MILLED FLAT AREA ON EACH LEG increases surface contact to help prevent any hanger floor damage.

F:THREE 3" (76mm) SPRING LOADED CASTERS allow easy transporting of the Jack around the hanger.

G:TWO ACCESSORY TUBES are provided to allow the operator to put in accessories or tools for on-board storage if desired.

H:The optional ALW-10 Leveling Washer Set is a perfect solution when it's necessary to shim the A500 Aircraft Jack legs.

Due to current logistic instability, we are temporarily suspending international shipments for this item. We will resume international shipments as soon as the situation clears.