This exceptional wire stripper easily strips wires from 22-8 AWG, is built with cast alloy chassis, and has a convenient recoiling spring design. The addition of fast compound wire stripping action and the stripping holes precisely machined.

Size 4" to 4-1/2", 120 Grit Silicon Carbide. For cylinder bore reconditioning. Provides proper finish for cylinder wall breaking without expensive fixtures.

For #8 AN Screws. Similar to pop dimpler, but uses and allen screw to apply force. Each size comes with male & female die, allen screws and nuts and allen wrench.

Pro-Grabit works on damaged screws and broken bolts from as small as #4 screw to as large as a 3/8" bolt without any center punching or preparation. One end is a self-centering left-handed drill, and the other is a high torque extractor. 4 piece kit

Heavy-duty cutter makes clean, right angle cuts with no burrs or chips to clog tubing. Kit includes roller for making brazed connections, spare cutting wheel and foldaway reamer. Cuts or constricts tubes from 1/4" to 1 5/8" (4-28mm).

Rivet Set Extension, .401 Shank, 8" Long. Insert standard rivet sets for added reach. Accepts 401 shank sets

Powerful full-ratcheting crimper with safety release and adjustable crimp pressure. Very comfortable rubber handles and ergonomic design makes it easy to install multiple terminals. Crimps Insulated Terminals & Splices: 22-10 AWG red, blue, and yellow.

This tool simplifies magneto timing on TCM (Continental) series C85, C90, and O-200 engines. No protractor on the spinner required, or other complicated tooling. Simply place it over the prop nuts and sight down the casing split to set the timing.

1/8" AN470 10 Degree Offset Rivet Set. Designed to work with our new ATS Pro 200B Rivet gun. They will also work with any Jiffy 100 or 200 rivet guns. Overall length of 1-3/16".

3/8" Diameter. Overall length 1.19". Solid carbide tip for long life. 1/4X28 thread. Fits standard microstops

Drill-out is a drill-bit and extractor in one tool. It drills into broken bolts on center and extracts them cleanly using the power of the drill. Seven (7) piece kit includes bits to remove #5" - 1/2", and M3 - M12 bolts.

Hand seamer with 3-1/2” jaw Has VISE GRIP locking feature to aid clamping & holding work. Used for straightening and bending rib and bulkhead flanges. Made with 7” VISE GRIP pliers. Jaws are 3/16” X 1” X 3-1/2” stainless steel with 3/32” radius on front