The Handy Packer works on bearings up to 3 1/2" O.D. The grease stays in the tool cavity, not on your hands.

1/2" Drive Straight Head. 25-250 FT-LB. Digital precision guarantees exact torque settings by beeping when the desired torque (or angle) is reached. Accurate to +/- 2% CW and 3% CCW from 20% to Full Scale.

Set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Made in USA by Avery Enterprises.

Mighty-mite air ratchet only 4-1/2" small, but delivers up to 20 ft-lb (27 Nm) of torque to handle even the most stubborn nut or screw. 3/8" driver features a built-in 1/4" hex receptacle so you can use it as a ratchet wrench, or as a screwdriver. Great

Zephyr's "Big" Hi-Lok Removal Plier offers a quick and inexpensive alternative for removing large size frangible hex collars such as Hi-Lok, Hi-Lite, Hi-Tigue, Veri-Lite, and C-Lok fasteners.

4oz Medium Paste. Boelube® is a specially formulated lubricant patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades, taps & dies, boring tools, and any other application where smooth cutting action is required.

Alden Drill-Out extractors are the only power extractors in the world. The patented design drills and extracts broken screws and bolts in one step. Removes: #5, #6, #8, #10, #12, 1/4", M3, M4, M5, and M6 screws and bolts.

The amazing thing about these wrenches is that the open end actually ratchets! No need to reposition with every stroke, both box end and open end are ratcheting. 8 piece set in sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4.

1/2" Internal Nut Wrench with 1/2" square drive. This wrench is designed specifically to install and remove Lycoming Narrow Deck (ND), IO-390, and IO-580 internal wrenching nuts.

Basic sheet metal riveting kit. Good for students or beginners. This kit is ideally suited for the A&P mechanic starting out in the field. It contains all the tools needed to perform the most commonly encountered sheet metal repair jobs.

Accepts any dimple die or rivet squeezer with a 3/16” (.187) shank. A great resource when you need to do work in areas where a rivet squeezer will not work. The driver has a .401 shank to fit a standard rivet gun.

Optional reaming yoke for use with 400F Aviation Flaring Tool. We highly recommend that you use a reaming yoke when flaring stainless steel tubing as it will minimize the potential of cracking the tube.