This arbor is used for mounting the AES Smart Eraser Wheel (p/n AES51823) so that it can be used in a drill. Requires a drill with a 1/4" or higher chuck, and capable of speeds between 2000 and 4000 rpm.

Male dimple die is modified for use in the RV-14 build.

1/2" (0.5000) diameter, 4-1/2" Flute Length. Zero-degree rake, a 90-degree point, and parabolic cutting flutes to drill through Plexiglas, and acrylic plastics without binding or "breaking out."

7/16" (0.4375) diameter, 4-1/2" Flute Length. Zero-degree rake, a 90-degree point, and parabolic cutting flutes to drill through Plexiglas, and acrylic plastics without binding or "breaking out."

Use with SCOTCH-BRITE hand pads. Size is 3-1/2" wide by 4-3/4" long

Throw away your chuck key forever with our new keyless chuck. Its patented design allows it to grip securely in either forward or reverse, and the more torque you apply to it, the tighter it will grip. Fits any reversible drill with a 3/8" x 24 thread.

Designed for impact use, these adapters are 20% smaller than standard adapters. They feature a knurled bands for enhanced grip. The spring loaded detent ball ensures that your sockets aren't going anywhere!

9/16" Diameter. Overall length 1.19". Solid carbide tip for long life. 1/4X28 thread. Fits standard microstops

10" Overall Length Drill Extension. Used to extend drill bits, pilot cutters, etc. 1/4" shank on one end for air or electric drill and 1/4"X28 internal thread.

25 feet working length. 1/4" inside diameter, 200 psi max pressure. 1/4" NPT threads.

21/32" Dia., Length 2-3/4", pilot 3/16". used with 1400P series pilots. 4 flute. Made of High Speed Steel. Requires 1400P series pilot.

17/32" Dia., Length 2-3/4", pilot 1/8". used with 1400P series pilots. 4 flute. Made of High Speed Steel. Requires 1400P series pilot.