Miniature chuck is less than an inch in diameter and features as 1/4-28 thread to mount mounts directly to your Angle Drill or attachment.

Zephyr's "Big" Hi-Lok Removal Plier offers a quick and inexpensive alternative for removing large size frangible hex collars such as Hi-Lok, Hi-Lite, Hi-Tigue, Veri-Lite, and C-Lok fasteners.

#5 Flush Head Airloc Dimpling tool (very common in Beechcraft Airplanes). Required when installing flare type Airloc® fastener grommets.

Used for dimpling thin sheet metal panels to accept the 2700 Series Camloc (C-Spec) Fasteners. It can also be used to dimple panels to accept FJ4 Series Flush-Head Dzus (Z-Spec) Fasteners. This simple tool makes a perfect dimple every time, with the exac

For 1/4" Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rive

10 pieces, 1/4" shank Mounted Diamond Point set range in diameter from 1/16” to 5/16” in various shapes. Useful for trimming, hole resizing, precision fitting, etching, etc. Works best with hard materials such as steel, glass, ceramics, and composites.

Drill guide is sized for drill bit sizes: 1/8 to 3/8". 17drill sizes - 1/64" increments.

Head clearance is only 1/4" to get into very tight areas. 3" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.

Set of 5 pins for 3/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

Put the lubrication precisely where it needs to go with Dualco™ grease gun fittings. These grease gun fine attachments really help you to control the flow into small crevices, holes, fittings, or any other destination requiring pinpoint accuracy.

Measures sizes: 1/32", 3/64", 1/16", 3/32", 1/8", 5/32", & 3/16". Checks cable swages to see if they meet acceptable standards.

Electronics Tech Kit contains 32 tools selected to help DIYers disassemble, fix and reassemble small components. Includes a precision aluminum screwdriver handle with a magnetic tip and 24 blades for screws of the type and size.