Standard blade for the SVBHD Deburring Tool. Works with steel and aluminum. Deburrs edges and holes down to 1/4".

Set of 5 pins for 5/32" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

Size #21. 6" working length. Drill bushing type (most commonly ordered series) for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.

Accurate, versatile tool for drilling perfect right angle or variable angled holes on tubing, pipes or flat shapes. Lightweight, portable, use on any (1/4" or 3/8") air or electric drill. Has 5 degree graduations (0 - 45 degree left or right).

Size #30. 6" working length. Inverted drill bushing type. Inverted Duplicators allow you to locate a hole from the back of an overlapping sheet.

Size #40. 6" working length. Inverted drill bushing type. Inverted Duplicators allow you to locate a hole from the back of an overlapping sheet.

Used to install standard 1/4" corner style plate nuts (CWS).

Used to install standard #6 corner style plate nuts (CWS).

Used to install standard #8 corner style plate nuts (CWS).

Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 7" Working Length.

Double-Edged blade for SVBHD Deburring Tool. Deburrs both sides of holes as small as 1/8" at once. Works with steel and aluminum.

Size: 3/16". Deburrs the front, back or both sides of a hole in one pass. Works with any drill. Adjusts easily by turning a set screw in the shank to control the depth of cut.