45 deg., 1/4" Capacity, 1/4x28 Thread. Fits any air or electric drill. Dimensions are 7-1/2" long, 1-3/16" head height 3/8" side to center.

The diamond cut jaws of these Hi-Lok® removal pliers will grip the fastener from the top or bottom of the offset head. Manufactured from high carbon steel for extra strength and durability.

The valve tappet clearance gauge checks the minimum (.028”) and maximum (.080”) clearance gap between the rocker arm and the valve stem cap when the lifter (tappet) is dry and fully collapsed. The blades are ground and polished to precisely .080” and .028

Amazing tube cutter cuts squarely every time. Cuts all types of hoses including Kevlar. Two-way rotating blade for twice the live of ordinary cutters.

NAS1097AD Flush Shear Rivet ("oops rivets") assortment of 3/32" and 1/8" diameter rivets in six (3) most commonly used lengths.

Powerful jaws breezes through 16ga sheet metal at over 50 feet/min. Great for rough cutting, or finish trimming. Triple blade (2 stationary, 1 moveable) design cuts without leaving any edge burrs or distortions.

1/4" Pilot diameter, 1/2" Brush diameter, 1/4" Shank. Fits any 1/4" air or electric drill. Stainless steel brush used to clean away corrosion and paint buildup prior to bonding.

#27 (0.1440), Cobalt, 135 degree split point, jobbers length. Overall length 3-1/8". Pack of 12 each.

Every mechanic knows the importance of cutting the media open to spread the pleats for inspection of metal in the filter. In the past, this has been a difficult job to complete.

What every toolbox needs, a soldering iron with auto gas ignition. Ideal for starting and operating easily and safely under any condition. The high transparent nylon gas tank and ceramic heater prolong the service life.

#6.5 Oval Dzus Flaring Tool for installing flare type grommets. This tool is required when installing flare type grommets. Requires Clamping Tool (not included).

Size: 3/32". Deburrs the front, back or both sides of a hole in one pass. Works with any drill. Adjusts easily by turning a set screw in the shank to control the depth of cut.