Rivet Set, Double Offset, 3/32" Univ., 5" Long, .401 Shank

320 grit replacement belts for Sanding Stick Kits. Belts are 1/4" x 12-3/4" aluminum oxide belts and are made for the newly designed pencil-type sticks.

Also called a "Screw Knocker", "Woodpecker", or "Nut Buster", this is used o remove screws, bolts, nuts, etc. that are corroded or cannot be loosened by conventional methods. 4" long.

7/8" Dia, 3/8" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

5/16" Dia, 1/8" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

1 lb hammer. Non-sparking brass hammers are recommended for use in areas where possible sparks may cause a safety hazard.

The original Crescent Wrench (aka Monkey Wrench, aka Ford Wrench, aka Spud Wrench). It’s the mechanics tool of choice for removing and installing "B" nuts. 18" Long.

The double-sided guide features a tap drill depth chart, decimal conversions from 1/6" to 6" and a ruler graduted to 6ths.

The BeadBuster XB-550 HEAVY DUTY is the big brother of the original XB-450. All of the 45X series tools have the same design geometry, the 550 is larger in every way. Heavier steel, thicker walls, more extension.

Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.

Schauer’s intelligent charger design follows the battery impedence to the end of the charge cycle for all battery types, thus ensuring a full charge with virtually no danger of overcharging or cooking the battery. 24 volts at 2 amps with battery clips.

Schauer’s intelligent charger design follows the battery impedence to the end of the charge cycle for all battery types, thus ensuring a full charge with virtually no danger of overcharging or cooking the battery. 12 volts at 5 amps with battery clips.