Taper diameter from 0.4474" to 0.6145". Brown & Sharpe taper reamer. Flute length: 4". Overall length: 6-3/8". Straight Shank - Straight Flute.

Copper, 1/8" Dia, 0"-1/4" Grip. Stubby Cleco is only 1.5" (38mm) high from end to end. Use it to get into tight areas and temporarily hold sheet metal sections in place prior to riveting. Requires cleco pliers (p/n 131).

Silver, 7/32" Dia, 0"-1/4" Grip. Standard fastener used to temporarily hold sheet metal sections in place prior to riveting. Requires cleco pliers (p/n 131).

For AN8 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rivet

The McFarlane seat roller housing gauge is designed to help you comply with the Cessna Seat Roller Housing Inspection as mandated by FAA AD 2011-10-09.

A skin wedge is the tool to use when you need to pry and jog sheet metal skins. Just slip the thin curved blade into the gap and slide it along the edge to gently separate the edges without gouging the skin.

The world is held together with nuts, screws and bolts, which will need to be maintained, repaired, or replaced. Stripped, rusted, or rounded, the VamPLIERS screw remover is the perfect tool for every maintenance, repair & operation toolbox.

4oz Medium Paste. Boelube® is a specially formulated lubricant patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades, taps & dies, boring tools, and any other application where smooth cutting action is required.

#30 drill stop. Overall length 1-5/16". Used to stop the drill bit after reaching a preset depth.

Titan multi-wedge pry tool sets are specially designed to gently remove door panels, dashboards, consoles, and more. These tools feature different wedge shapes that allow you to get under and lift pieces away without damaging delicate surfaces.

At only 3-1/2" long this little ratcheting bit driver is the perfect tool for those tight spaces where a drill or screwdriver just won't fit. The Micro Bit Driver accepts any standard 1/4" hex-drive bit, and includes 8 driver bits of its own.

Bends 3/16", 1/4", 5/16" & 3/8" tubing. For making up to 90° and offset bends. Accepts aluminum, copper, mild steel and other metal tubing. Not recommended for stainless steel (see p/n 470FH). Manufactured in USA by Imperial.