Rivet Set Extension, .401 Shank, 8" Long. Insert standard rivet sets for added reach. Accepts 401 shank sets

3/8" Diameter. Overall length 1.19". Solid carbide tip for long life. 1/4X28 thread. Fits standard microstops

Alignment pins for use in installation of engine mounts on aircraft engines. Pins go in the holes ahead of bolts to help align everything without damaging the bolts.

Hand seamer with 3-1/2” jaw Has VISE GRIP locking feature to aid clamping & holding work. Used for straightening and bending rib and bulkhead flanges. Made with 7” VISE GRIP pliers. Jaws are 3/16” X 1” X 3-1/2” stainless steel with 3/32” radius on front

Drill-out is a drill-bit and extractor in one tool. It drills into broken bolts on center and extracts them cleanly using the power of the drill. Seven (7) piece kit includes bits to remove #5" - 1/2", and M3 - M12 bolts.

This tool simplifies magneto timing on TCM (Continental) series C85, C90, and O-200 engines. No protractor on the spinner required, or other complicated tooling. Simply place it over the prop nuts and sight down the casing split to set the timing.

Size: 1/8". Deburrs the front, back or both sides of a hole in one pass. Works with any drill. Adjusts easily by turning a set screw in the shank to control the depth of cut.

Put the lubrication precisely where it needs to go with Dualco™ grease gun fittings. These grease gun fine attachments really help you to control the flow into small crevices, holes, fittings, or any other destination requiring pinpoint accuracy.

Designed to work with our new ATS Pro 200B Rivet gun. They will also work with any Jiffy 100 or 200 rivet guns. Overall length of each rivet set is 1-3/16". The complete 4 piece kit includes 3/32", 1/8", 5/32", and 3/16" AN470 Sets at 10 degrees offset.

Brass, 3/16" Dia., Extra Long 0-1/2" grip. Similar to our standard clecos (K-xx series), but designed for heavier applications. It also has a longer reach. Requires cleco pliers (p/n 131).

Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.

1/4" Huck & High-Shear Collar Remover. Heavy duty type splitter cleanly shears away the locking collar, allowing the removal of the locking bolt. Heavy Duty design less prone to breakage. 5.5" long. Compatible with any .401" shank rivet gun or hammer.