3X Magnifying Inspection Mirror features a telescoping handle that extends from 8-1/2" to 29". Great for inspecting small features in obstructed or difficult to reach areas.

Industrial type 1/4" FEMALE quick-connect air coupler.

Pitot Tube Covers keeps dirt, insects, and contamination from entering the pitot tube. High visibility read streamer is easy to detect even in low lighting conditions. For 5/8" diameter pitot tubes.

Taper diameter from 0.8974" to 1.1530". Brown & Sharp taper reamer. Flute length: 6-1/8". Overall length: 8-7/8". Straight Shank - Straight Flute.

Set of 5 pins for 5/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 14-16 AWG (blue) single and multi-strand wires. 1/4" post eyelet size. 25 pieces per package.

The set consists of 6 double-ended tools with pick and brush tips. This kit is specially designed to aid you in protecting your heat sensitive components during soldering.

Put the lubrication precisely where it needs to go with Dualco™ grease gun fittings. These grease gun fine attachments really help you to control the flow into small crevices, holes, fittings, or any other destination requiring pinpoint accuracy.

Put the lubrication precisely where it needs to go with Dualco™ grease gun fittings. These grease gun fine attachments really help you to control the flow into small crevices, holes, fittings, or any other destination requiring pinpoint accuracy.

Replacement Pin for CE-0275 3.2MM 2.8MM ID Designed for use with various connectors such as MOLEX, AMP, TYCO, etc. Quickly and easily extract crimped pins from their housing.

Heavy Duty blade for the SVBHD Deburring Tool. Works with steel and aluminum. Deburrs edges and holes down to 1/4".

Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 7" Working Length.