Stainless steel automatic center punch.

Unibit Step Drill Bit, Cobalt HSS, 1/4" to 3/4", 9 Hole Sizes, 3/8" Shank IRWIN Unibit Cobalt is made of high speed steel, this step drill bit will last longer in the toughest of materials. Best suited for maintenance and repair work.

10 pieces, 1/4" shank Mounted Diamond Point set range in diameter from 1/16” to 5/16” in various shapes. Useful for trimming, hole resizing, precision fitting, etching, etc. Works best with hard materials such as steel, glass, ceramics, and composites.

Miniature chuck is less than an inch in diameter and features as 1/4-28 thread to mount mounts directly to your Angle Drill or attachment.

Reduces bore size of .498" Rivet Guns to use .401" shank tooling.

Head clearance is only 1/4" to get into very tight areas. 3" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.

Used for dimpling thin sheet metal panels to accept the 2700 Series Camloc (C-Spec) Fasteners. It can also be used to dimple panels to accept FJ4 Series Flush-Head Dzus (Z-Spec) Fasteners. This simple tool makes a perfect dimple every time, with the exac

Precision acme threads for easy, smooth adjustment. Very stable work or storage platform. Stays in place with no bleeding, etc. Small footprint of base and top pad allow for easy access. Stands stack neatly when not in use to free up valuable space.

These extended versions of our 2470 Back Rivet Sets are great to get into confined areas. They are especially useful to RV-10 builders who must back rivet some areas of the fuselage. 12" long straight, .401 shank

2" Yoke for ATSRS series Rivet Squeezers.

Set of 5 pins for 5/32" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

Set of 5 pins for 3/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.