Showcase

ATS PRO DIFFERENTIAL PRESSURE TESTER KIT

This time-saving kit includes our top of the line 2EM Differential Pressure Tester and the new 18MM-XT Spark Plug Port Extender for effortless leakdown testing at a great value.

Price: $160.25
Showcase

MINI RIVETING KIT (3X PRO GUN)

This is an excellent kit for those who only need to do occasional riveting work. It contains the essentials to get the job done without any of the extras you may not need.

Price: $235.75
Showcase

ATS PRO 90 DEGREE HEAVY DUTY ANGLE DRILL

Heavy duty 90 degree air drill operates at 3500RPM and delivers .33HP. Uses 1/4x28 threaded bits and accessories. Compact head design (1.07" high x .66" dia) accepts up to 1/4" bits. Ideal for extremely close-quarter areas.

Price: $416.25
Showcase

ATS PROFESSIONAL RIVETING KIT (3X)

Professional Riveting contains everything needed for riveting. Complete kit includes ATS-3X Pro Riveting gun plus: 4 bucking bars, 5 Straight Rivet Sets, 4 Offset Rivet Sets, Custom Molded Case, and more...

Price: $310.25
Showcase

DELUXE IGNITION TIMING KIT

Includes the ATS E50A Mag Synchronizer, E5A High Voltage cable tester, Mag Locks, and P-Lead adapters to perform magneto synchronization and ignition quality checks quickly and reliably.

Price: $365.25
Showcase

DUAL SUPER DUTY RIVET SQUEEZER KIT

We would like to introduce our new Dual Squeezer Kit! This kit features everything our popular SDRS-KIT has but instead of just a 3" yoke we added the whole 3" squeezer! Now you will get our best selling Stainless Steel Rivet Squeezer with a 1 1/2" yoke,

Price: $376.25

2262 matches for Today's Featured Products.

CONTROL LOCK (LSA)

SKU: DAS-CL210

CONTROL LOCK (LSA) (DAS-CL210)
Works with a broad range of stick-controlled LSA airplanes. See the details section for a more complete listing.
Price:$84.95 Sale:$76.25
BLIND HOLE PINS, 5/32" (5 PCS)

SKU: BHP-5/32

BLIND HOLE PINS, 5/32 (5 PCS) (BHP-5/32)
Set of 5 pins for 5/32" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.
Price:$6.95 Sale:$6.25
MINIATURE 1/8" DRILL CHUCK

SKU: T9750-C

MINIATURE 1/8 DRILL CHUCK (T9750-C)
Miniature chuck is less than an inch in diameter and features as 1/4-28 thread to mount mounts directly to your Angle Drill or attachment.
Price:$41.95 Sale:$37.75
3" CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS)

SKU: RS1007A

3 CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS) (RS1007A)
Head clearance is only 1/4" to get into very tight areas. 3" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.
Price:$92.95 Sale:$83.50
CAMLOC DIMPLER (C-SPEC 2600/2700)

SKU: MS-27DT

CAMLOC DIMPLER (C-SPEC 2600/2700) (MS-27DT)
Used for dimpling thin sheet metal panels to accept the 2700 Series Camloc (C-Spec) Fasteners. It can also be used to dimple panels to accept FJ4 Series Flush-Head Dzus (Z-Spec) Fasteners. This simple tool makes a perfect dimple every time, with the exac
Price:$24.95 Sale:$20.25
AIRLOC FLARING TOOL (#5 FLUSH HEAD)

SKU: MS-AL5F

AIRLOC FLARING TOOL (#5 FLUSH HEAD) (MS-AL5F)
#5 Flush Head Airloc Dimpling tool (very common in Beechcraft Airplanes). Required when installing flare type Airloc® fastener grommets.
Price:$35.95 Sale:$29.25
FLAP ROLLER INSTALLATION TOOL

SKU: MA970

FLAP ROLLER INSTALLATION TOOL (MA970)
This handy tool makes easy work of installing the aft flap roller, bushing and washers in Cessna 150 through 210 airplanes. It holds parts in alignment while inserting the bolt, and the long handle allows you access through the small inspection openings.
Price:$45.95 Sale:$41.25
BIG GATOR V-DRILL GUIDE STANDARD 1/8-3/8

SKU: STD1000DGNP

BIG GATOR V-DRILL GUIDE STANDARD 1/8-3/8 (STD1000DGNP)
Drill guide is sized for drill bit sizes: 1/8 to 3/8". 17drill sizes - 1/64" increments.
Price:$31.95 Sale:$28.75
BLIND HOLE PINS, 3/16" (5 PCS)

SKU: BHP-3/16

BLIND HOLE PINS, 3/16 (5 PCS) (BHP-3/16)
Set of 5 pins for 3/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.
Price:$6.95 Sale:$6.25
SWAGER SLEEVE GAUGE

SKU: GA1P

SWAGER SLEEVE GAUGE (GA1P)
Measures sizes: 1/32", 3/64", 1/16", 3/32", 1/8", 5/32", & 3/16". Checks cable swages to see if they meet acceptable standards.
Price:$14.95 Sale:$13.25
REPLACEMENT JAWS FOR ATS8802V-04

SKU: ATS8802V-04

REPLACEMENT JAWS FOR ATS8802V-04 (ATS8802V-04)
Replacement 3-piece jaw set for ATS8802V.
Price:$20.95 Sale:$17.25
AVIATION JACKSTAND W/TOPS

SKU: AS2

AVIATION JACKSTAND W/TOPS (AS2)
Precision acme threads for easy, smooth adjustment. Very stable work or storage platform. Stays in place with no bleeding, etc. Small footprint of base and top pad allow for easy access. Stands stack neatly when not in use to free up valuable space.
Price:$232.95 Sale:$207.95