Showcase

ATS PRO DIFFERENTIAL PRESSURE TESTER KIT

This time-saving kit includes our top of the line 2EM Differential Pressure Tester and the new 18MM-XT Spark Plug Port Extender for effortless leakdown testing at a great value.

Price: $160.25
Showcase

MINI RIVETING KIT (3X PRO GUN)

This is an excellent kit for those who only need to do occasional riveting work. It contains the essentials to get the job done without any of the extras you may not need.

Price: $235.75
Showcase

ATS PRO 90 DEGREE HEAVY DUTY ANGLE DRILL

Heavy duty 90 degree air drill operates at 3500RPM and delivers .33HP. Uses 1/4x28 threaded bits and accessories. Compact head design (1.07" high x .66" dia) accepts up to 1/4" bits. Ideal for extremely close-quarter areas.

Price: $416.25
Showcase

ATS PROFESSIONAL RIVETING KIT (3X)

Professional Riveting contains everything needed for riveting. Complete kit includes ATS-3X Pro Riveting gun plus: 4 bucking bars, 5 Straight Rivet Sets, 4 Offset Rivet Sets, Custom Molded Case, and more...

Price: $310.25
Showcase

DELUXE IGNITION TIMING KIT

Includes the ATS E50A Mag Synchronizer, E5A High Voltage cable tester, Mag Locks, and P-Lead adapters to perform magneto synchronization and ignition quality checks quickly and reliably.

Price: $365.25
Showcase

DUAL SUPER DUTY RIVET SQUEEZER KIT

We would like to introduce our new Dual Squeezer Kit! This kit features everything our popular SDRS-KIT has but instead of just a 3" yoke we added the whole 3" squeezer! Now you will get our best selling Stainless Steel Rivet Squeezer with a 1 1/2" yoke,

Price: $376.25

49-60 of 123 results

Sort By
<1…456…11>

123 matches for Category Is Drilling Aids.

10" DUAL THREADED DRILL EXTENSION

SKU: T3810

10 DUAL THREADED DRILL EXTENSION (T3810)
Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 10" Working Length.
Price:$10.95 Sale:$9.75
4" DUAL THREADED DRILL EXTENSION

SKU: T384

4 DUAL THREADED DRILL EXTENSION (T384)
Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 4" Working Length.
Price:$8.95 Sale:$8.25
HEX POWER DRIVER DRILL EXTENSION (4")

SKU: H384

HEX POWER DRIVER DRILL EXTENSION (4) (H384)
Used to extend threaded drill bits, pilot cutters, or any other cutter with a 1/4-28 thread. Has a 1/4" Hex Drive on the shank end to fit a drill or screwdriver, and a 1/4-28 internal (female) thread at the other. 4" extension length.
Price:$10.95 Sale:$9.75
DRILL STOP, 1/4"

SKU: DS-1/4

DRILL STOP, 1/4 (DS-1/4)
1/4" drill stop. Overall length 1-5/16". Used to stop the drill bit after reaching a preset depth.
Price:$7.95 Sale:$7.25
6" STRAP DUPLICATOR (#10)

SKU: 65

6 STRAP DUPLICATOR (#10) (65)
Size #10. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.
Price:$14.95 Sale:$13.25
BLIND HOLE PINS, 1/8" (5 PCS)

SKU: BHP-1/8

BLIND HOLE PINS, 1/8 (5 PCS) (BHP-1/8)
Set of 5 pins for 1/8" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.
Price:$6.95 Sale:$6.25
HSS 3 FLUTE DE-BURRING CUTTER

SKU: AE1050

HSS 3 FLUTE DE-BURRING CUTTER (AE1050)
Swivel action - makes deburring & countersink holes fast & easy. Molded handle with 2” long plated steel shaft with 1/4”-28 threaded holder. Includes (1) 3/8” X 100° 3-flute burring cutter and 8” extension shaft for deburring the inside of flanges & other
Price:$19.95 Sale:$17.75
AUTOMATIC CENTER PUNCH

SKU: E900-158

AUTOMATIC CENTER PUNCH (E900-158)
Used for repetitive punching or riveting action. Adjustable for light or heavy impact. Enlarged plastic handle for impact cushioning.
Price:$11.95 Sale:$10.75
CENTER-IT DRILL GUIDE

SKU: CIT01

CENTER-IT DRILL GUIDE (CIT01)
A simple and easy to use drill press fixture that bolts to a drill press table and automatically centers tubing and other round stock for precise drilling. Guaranteed to produce a centered hole every time.
Price:$17.95 Sale:$15.75
PLATE NUT DRILL JIG, #10 SINGLE-WING MINIATURE (SWM)

SKU: 518PD

PLATE NUT DRILL JIG, #10 SINGLE-WING MINIATURE (SWM) (518PD)
Used to install #10 miniature one lug single-wing style plate nuts (SWM).
Price:$45.95 Sale:$41.25
PLATE NUT DRILL JIG, #6 CORNER STANDARD (CWS)

SKU: 518R

PLATE NUT DRILL JIG, #6 CORNER STANDARD (CWS) (518R)
Used to install standard #6 corner style plate nuts (CWS).
Price:$45.95 Sale:$41.25
PLATE NUT DRILL JIG, #8 CORNER STANDARD (CWS)

SKU: 518S

PLATE NUT DRILL JIG, #8 CORNER STANDARD (CWS) (518S)
Used to install standard #8 corner style plate nuts (CWS).
Price:$45.95 Sale:$41.25
<1…456…11>