Automatically feeds your air tools with the proper amount of oil for longer tool life. 1/4" NPT thread.

For AN8 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rivet

For AN10 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rive

McFarlane’s new wheel balancer uses the same static balancing method that is used to balance helicopter rotors.

This gauge is used for inspection of seat rail wear in Cessna aircraft per AD2011-10-09 Seat Rail Directive.

Perfect for safely removing sealants, adhesives, stickers, labels, grime, and more. They will easily slice through sealants, but will not damage the underlying structure. Fits into any Rivet Gun or Air Hammer (.401" shank). 2" wide x 6.5" long.

The patented spring coil design of these tube benders allows you to bend aluminum and copper tubing in to complex shapes without crushing or creasing the tube. For tube sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", and 7/8" OD.

Works for Piper Malibu, Meridian & Mirage - Hand Pull

Works for Lancair RG Kit Plane

A bright red heavy nylon banner that can be fastened to anything that needs removing before flight. Comes with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. Heavy duty vinyl is tear resistant.

Bends 1/2" diameter aluminum and copper tubing. Bend radius is 1-1/2". Open side type which slips over tube at any point. Makes smooth short radius bends up to 180°.

Works for Aerostar