#40 size. Used with DH01 drill housing.

Size #10. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.

Used to install standard #6 corner style plate nuts (CWS).

#21 size. Used with DH01 drill housing.

Standard blade for the SVBHD Deburring Tool. Works with steel and aluminum. Deburrs edges and holes down to 1/4".

Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 2" Working Length.

#40 drill stop. Overall length 1-5/16". Used to stop the drill bit after reaching a preset depth.

1/4" size. Used with DH01 drill housing.

Set of 5 pins for 1/8" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

Set of 5 pins for 3/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

#30 drill stop. Overall length 1-5/16". Used to stop the drill bit after reaching a preset depth.

Allows you to extend the length of your threaded drill bits, or pilot cutters to reach into recessed areas. One end is threaded male 1/4"-28 to fit into your Angle Drill, and the other has a 1/4"-28 female to accept the bit. 10" Working Length.