Hand seamer with 3-1/2” jaw Has VISE GRIP locking feature to aid clamping & holding work. Used for straightening and bending rib and bulkhead flanges. Made with 7” VISE GRIP pliers. Jaws are 3/16” X 1” X 3-1/2” stainless steel with 3/32” radius on front

When overlapping two pieces of sheet metal, you must "jog" the edge of one sheet so that they will join together seamlessly - and that’s just what this tool does. The jogging die places a nice 1/2" jogging flange on the edge of sheet metal up to 16ga.

Set of 5 pins for 1/4" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.

0-5/32" Capacity by 1-1/2" Reach. A flip lever makes this one of the easiest clamps to use. No special installation tools required.

Made from hard steel (RC 65-66) and bi-metal construction, this hole saw kit is as tough as they come. Compare this unit to the average hole saw and you will notice 4/6 variable pitch teeth.

Hardwood Handle Scratch Awl is highlighted by a 3-3/4" exposed blade and a fluted handle.

All steel construction for long dependable life. Ideal for removing chips from between metal after drilling rivet holes. Stubby length 2-1/2" reach, 6-3/4" overall length.

2" Diameter Head x 7/16" Face Radius x 1" Face Radius. High quality bossing mallets are lightweight, resistant to wear, and feature non-marring polyethylene heads. Use with a shot bag to produce simple or complex shapes in sheet metal.

Single crimp (3 blades) has 1-1/4" jaw depth.

Heavy duty scribe that's used to mark metal parts prior to cutting. Tip is specially hardened to hold its point even when marking hard metals such as titanium. The tip is also easily replaced when it becomes dull.

Locking C-Clamp with Swivel Pads, 6", has swivel pads that hold tapered work, cumbersome fabricating jobs and delicate projects without damaging the work surface. These locking clamps are designed with a turn screw to adjust the pressure.

Cuts Left and Straight. Irwin™ has once again set the standard for quality snips. Their new Offset Snips feature cold-formed blades that are stronger and sharper than any other brand.