Bends Dzus "S" wire receptacles quick and easy. Fits all #5 and #6 series (1" and 1-3/8" rivet spacing) springs. Complete easy to follow instructions included.

Boelube® is a lubricant formulated and patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades and any other application where smooth cutting is required. A small amount will greatly improve tool life. 1.6oz pushup stick.

I don’t have to tell you how aggravating it can be to reach down into the cowling to get to those spark plug holes for a quick leakdown check. It’s a real pain to get the hose to reach the spark plug hole without contorting your arm into pretzels.

Yoke, Squeezer, 3-7/8" Deep, 1-3/16" High. Fits ATS-114C and Chicago Pneumatic 214C squeezers.

A bright red heavy nylon banner that can be fastened to anything that needs removing before flight. Comes with a grommet and wire ring that can be attached to everything from gear pins to gust locks and pitot covers. Heavy duty vinyl is tear resistant.

This product is a clever way to set dimple in sheet metal using a pop riveter. Just place both halves on the sheet metal insert in your riveter and squeeze to form a perfect dimple.

Unique airplane tie-down holds the biggest kites. Unless you have sand handy, there hasn’t been a way to tie down hard pulling kites without the use of heavy objects. The Claw has 1,200 lbs of holding power.

The Topcap engine protector is made to fit over the cylinder studs and shield the inside of your engine while maintenance is being performed. Topcap engine protectors are used by leading mechanics everywhere. Price is for a pair.

Used to access areas in and around vacuum pump flange. Precision formed angles reaches around obstacles and securely contacts nut. Ergonomic slip-resistant grip. Manufactured by Rapco.

A straight nosepiece is the preferred way to install Cherrymax(r) rivets if circumstances permit. Pulls all nominal and oversize Cherrymax rivets from 1/8" (-4) to 3/16" (-6). Fits GPB700 and GPB784; Cherry G700, and G784 riveters.

A set of 3/8” drive crowsfoot wrenches commonly used with torque wrenches. Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16” and 7/8”.

6oz retainer for use with Semco 250A dispense guns.