Closeout Specials

These great products are on special because we're phasing them out of our product line. They all carry a full warranty and we stand behind them 100%.

Order quickly because quanities are really, really limited.

NUT PLATE BLOCK 10-32
P/N CA-NPB10
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
NUT PLATE BLOCK, 8-32
P/N CA-NPB8
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
PUREWIPE SPONGE/PAD
P/N 582562F
These 4" x 4" sponges are made from 100% cotton woven gauze.
Closeout:$12.95 Qty
STREAMLIGHT STINGER® CLASSIC LED FLASHLIGHT
P/N 75663
The Stinger Classic LED features a custom optic design which provides a smooth beam with optimal peripheral illumination; optimized electronics provide regulated intensity throughout battery charge. Three modes and strobe. Waterproof and impact resistant.
Closeout:$135.95 Qty
DUPLICATING/TRANSFER PUNCH
P/N TP-5/32
5/32" diameter. Used to mark overlapping holes and for locating or aligning holes. Overall length 3-1/2"
Price:$6.95 Qty
AEROTEX
P/N 588975T
This bleached crimped wiping cloth is manufactured from 100% cotton. Its unique finish is ideal for use whenever a wiping or polishing cloth is needed.
Closeout:$14.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-12
Replacement punch and die for #45 hand punch. #12 size.
Closeout:$11.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-5/32
Replacement punch and die for #45 hand punch. 5/32" size
Closeout:$11.95 Qty
NUTPLATE BLOCK, 1/4-20
P/N CA-NPB-1/4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-40
Replacement punch and die for #45 hand punch. #40 size
Closeout:$11.95 Qty
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
P/N SH-S1
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$25.95 Qty
AMT HANDBOOK: AIRFRAME, VOLUME 1
P/N ASA-8083-31V1
This new FAA AMT Handbook—Airframe Volume 1 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
Closeout:$30.95 Qty
OIL & FILTER ANALYSIS KIT
P/N AVL-GA-M
Analyse the debris found in your oil filter.
Closeout:$59.95 Qty
9" CRIMPING WIRE CUTTING STEEL PLIERS
P/N PM-924
The 9" Steel Wire Cutting Crimping Pliers has a high quality SCM 440 hot-riveted design that features smooth wobble-free operation. It's High-Leverage design provides greater cutting and gripping power.
Closeout:$23.95 Qty
CYCLO FOAM BONNETS (YELLOW)
P/N CY71-135
A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$11.95 Qty
BIT, POWER SCREWDRIVER
P/N 1205
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
GREIDER TACK CLOTH
P/N 700844
This premium silicone-free tack cloth is the product of choice in certain painting applications. It is the product of choice for electronics manufacturers. It is an outstanding clean room tack cloth.
Closeout:$99.95 Qty
CARBIDE BURR (3/4 x 1 CYL SGL CUT)
P/N SA-S7
3/4" diameter by 1" long Cylindrical Carbide Burr (Type SA). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$74.95 Qty
DRILL BIT 6" AIRCRAFT EXTENSION
P/N 013-1
#1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
Closeout:$3.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-21
Replacement punch and die for #45 hand punch. #21 size
Closeout:$11.95 Qty
NIGHT COM UV LED
P/N 51046
This flashlight produces 115 lumens on high and 50 lumens on low. Mode selection switch from high, low, LED, and safety. Runs up to 10 hours when using the UV LEDs. 1 meter impact resistance tested.
Closeout:$89.95 Qty
PUREWIPE CHEESECLOTH
P/N 588039C
Made from 100% woven cotton, our cheesecloth is very soft and absorbent. The openness of the weave assures the user that the wiping cloth will not displace the contaminants on the surface.
Closeout:$45.95 Qty
STREAMLIGHT STRION® HL LED FLASHLIGHT
P/N 74751
Multi-function on/off push-button tail switch lets you choose three lightning modes and strobe. Lithium ion battery is rechargeable up to 1000 times; fully recharges in 3 hours. 6000 series machined aircraft aluminum with anodized finish.
Closeout:$135.95 Qty
RYMPLECLOTH
P/N 780332
Manufactured with 100% purified woven cotton, it’s unique crimped finish and firmly twisted yarns lift, entrap and remove particulates and, residual surface contamination.
Closeout:$13.95 Qty
NONWOVEN PUREWIPE
P/N 992130
Your plane can get so dirty and full of unwanted substances that it may just start to look sickly. Whatever ails your aircraft in terms of soiled surfaces can be cured with American Fiber's Purewipe Cleaning Cloths.
Closeout:$6.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL
P/N AMT-G3H
Dale Crane's AMT Series is the essential resource to pass the FAA’Knowledge Exams for Aviation Maintenance. The General text covers the first section of the FAA?s required curriculum, incorporating an introduction to aviation.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: POWERPLANT
P/N AMT-P3
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Powerplant details the technical maintenance of turbine and reciprocating engines.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: STRUCTURES
P/N AMT-STRUC-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Airframe: Structures details the subjects associated with aircraft structures as they relate to the landing gear.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: SYSTEMS
P/N AMT-SYS-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Systems covers the various systems involved with the airframe.
Closeout:$49.95 Qty
AMT HANDBOOK: AIRFRAME, VOLUME 2
P/N ASA-8083-31V2
This new FAA AMT Handbook—Airframe Volume 2 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
Closeout:$30.95 Qty
NUTPLATE BLOCK, 4-10
P/N CA-NPB4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
RATCHETING CRIMPER FOR NON-INSULATED TERMINALS
P/N CP-353
Save up to 35% energy with this new mechanism Ratchet Crimping Tool! The accurate crimping mold and self locking / releasing mechanical unit design ensure high crimping quality when crimping repeatedly.
Closeout:$55.95 Qty
AIRCRAFT GAS TURBINE POWERPLANTS
P/N EA-TEP-2
Book, Aircraft Gas Turbine Powerplants. The most up-to-date information on aircraft gas turbine powerplants available. New edition features over 450 pages and 500 illustrations.
Closeout:$65.95 Qty
FAR AERONAUTICAL INFORMATION MANUAL (FAR/AIM)
P/N FAR-AIM
Federal Aviation Regulations / Aeronautical Information Manual (FAR/AIM). Regulations for General Aviation, Sport Pilots, & Instructors.
Closeout:$17.95 Qty
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8")
P/N HS-1/8
1/8" High Shear & Huck Collar Splitter. Chisel type splitter is designed to remove the locking collars around High Shear and Huck locking rivets. 5-1/2" long. Compatible with all .401 shank rivet guns and hammers.
Closeout:$22.95 Qty
LIGHTNING DETECTOR, DELUXE
P/N LD50
This portable and ground-based unit comes in a rugger, weather-resistant plastic case and is more powerful that other units and will detect storms within 40 miles but will start detecting thunderstorms up to 70 miles away.
Closeout:$259.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
P/N SK-D6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$39.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
P/N SK-S6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$38.95 Qty
BULB, HALAGEN FOR VO SCOPES
P/N VO-1
Halagen bulb for Vo-Scope
Closeout:$12.95 Qty
MAGNAFLUX® BLACKLIGHT (100 WATT)
P/N ZB-23A
100 watt Black Light for the Magnaflux Zyglo tester. Very high intensity short-wave ultraviolet (UV) light used to illuminate Magnaflux Zyglo and other dies that will fluoresce under black light. Includes transformer and power control unit.
Closeout:$995.95 Qty