Silver, 3/32" Dia., Extra Long 0-1/2" grip. Similar to our standard clecos (K-xx series), but designed for heavier applications. It also has a longer reach. Requires cleco pliers (p/n 131).

Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.

Time-Rite "C", (Used with I200B18)

For AN6 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. doesn't work on domehead rivet

4 to 1 ratio nosepiece turns four times with each turn of the handle. Accepts any 1/4" bit. Includes a set of bits in sizes: Hex 3/32", 1/8", 5/32", 3/16"; Torx 15, 20, 25, 30; Phillips 0, 1, 2, 3; Slot 1/4", 3/16"; Square 2, 3

Ideal for deburring sheet metal edges. Special guard protects users hand.

This versatile tool is great for forming sheet metal, driving pins, loosening bolts, etc. Works just like a mallet, but with a lot more control. Fits into any standard rivet gun or air hammer that supports .401" shank tooling. 7" long.

3/4" Dia, 1/4" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

Make narrow & precise flutes for straightening ribs and bulkheads easier & better than pliers with molded jaws. Jaws are 3/16” diameter.

This tool is designed for squeezing the flush rivets on the RV kit control surfaces that use the Van's aircraft #AEX aluminum wedge, and these control surfaces taper to a point at the trailing edge.

American National Standard wire gage 0 to 36, used for gauging non-ferrous wire and metals such as aluminum, copper, and brass.

Rivet Set, Straight, 1" Flush, 4" Long, .401 Shank