Great for electrical repair work where wires or components must be removed and resoldered. One-shot vacuum action cleanly removes excess solder from the work area. Teflon tip resists heat and will not cause contamination.

20 pieces, 1/8" shank Mounted Diamond Point set range in diameter from 1/16” to 5/16” in various shapes. Useful for trimming, hole resizing, precision fitting, etching, etc. Works best with hard materials such as steel, glass, ceramics, and composites.

Easy torque-adjusting design with positive locking mechanism to preventaccidental setting alterations. Dual units scale indication. Bi-directionaltorque control. Signals by impulse when torque setting is reached. Meets DINISO 6789 and ASME B107.300-2010 s

Throw away those chuck keys! Step up to a keyless chuck and you'll never have to fumble through your toolbox again for a chuck key.

Painted or unpainted, MET-ALL®’s Aluminum & Stainless Steel polish keeps your aluminum and steel surfaces shining bright. It’s non-abrasive, environmentally safe formula guards against water spots and maintains luster. 16 oz can.

For AN4 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Do not work on domehead rivets

A well-built, low cost multimeter that’s excellent for tracking down electrical problems, or testing circuit voltages. It has all of the features of the more expensive units at a fraction of the cost.

3" squeezer head. For use with 5011-1 & 5022-3 rivet squeezers

Head clearance is only 1/4" to get into very tight areas. 1-1/2" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.

High Shear Rivet Punch, 5/16" Dia., 3-3/8" long. Uses a standard .401 rivet gun to remove High Shear and Huck rivets.

Scotch-Brite™discs are excellent for general purpose finishing. They provide a burr-free surface suitable for painting or fine polishing. Use them to remove light corrosion, oxides, and coatings. Sold in packs of five (5). 2" Diameter, S SFN grade.

Economical dielectric multi-position ear muffs with crown strap. Ultra-Lightweight. ANSI approved. NRR: 25