4oz Medium Paste. Boelube® is a specially formulated lubricant patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades, taps & dies, boring tools, and any other application where smooth cutting action is required.

Taper diameter from 0.4474" to 0.6145". Brown & Sharpe taper reamer. Flute length: 4". Overall length: 6-3/8". Straight Shank - Straight Flute.

For AN8 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rivet

Black, 1/16" Dia, 0"-1/4" Grip. Standard fastener used to temporarily hold sheet metal sections in place prior to riveting. Requires cleco pliers (p/n 131).

Designed to work in corner areas. Accepts any dimple die or rivet squeezer with a 3/16” (.187) shank. A great resource when you need to do work in areas where a rivet squeezer will not work. The driver has a .401 shank to fit a standard rivet gun.

These plastic abrasive particle-filled products remove 1/16 in or less of sealants, silicones, RTVs and adhesives from most surfaces but not the underlying paint or other coating. That means less time for rework.

1/4" & 3/8" Drive Micro Gearless Ratchet Set - 2-Pc Chrome-Molybdenum Steel. Gearless ratchet design for smooth operation and less than 3 degree sweep make these ratchets ideal for confined areas. Re-usable storage tray.

Hastings Quick Change Bands are a fast and efficient way to install piston rings on all types of engines. Use them with the Hastings Ring-O-Matic Pliers (p/n 1670). Fits piston sizes: 5-1/2" to 5-3/4".

Bends 3/4" diameter aluminum and copper tubing. Bend radius is 3". Open side type which slips over tube at any point. Makes smooth short radius bends up to 180°.

Hardened steel serrated replacement jaw set for ATS8805, ATS8806, and 3047 Riveters

Flush head. Body length: 1/2". body diameter: 1/2". can be used in hand squeezer or block set. Made out of stressed steel. Standard 3/16" (.187) shank

Shank diameter: .110-.128". overall length: 2-1/4". taper: 1/4" per foot. Used for cutting, trimming and routing