Mechaid safety springs (also called Quick Release springs) are used to retain FLUSH and other large diameter rivet sets. The open end fits around the barrel of the rivet and holds it securely. Fits most rivet guns.

This precision torque screwdriver is made to hold its calibration in even the most extreme environments. Easy to read scale is accurate to +/- 6% clockwise direction. Comes with matching certificate of calibration traceable to NIST. 5-40 in-lb range.

Perfect for safely removing sealants, adhesives, stickers, labels, grime, and more. They will easily slice through sealants, but will not damage the underlying structure. Fits into any Rivet Gun or Air Hammer (.401" shank). 2" wide x 10.5" long.

All aluminum telescoping handle (1-1/2" to 4-1/4") and solid steel construction makes the Shaviv® HD Deburring Tool the standard in the Tool & Die industry.

Made for dimpling in restricted and hard to reach places where regular dimple dies won’t fit. Made in our shop with 7 ” Vise Grip plier. Machined tool steel dimple dies are T.I.G. welded to the Vise Grip jaws then polished. Manufactured by Avery Tools.

Protect yourself from fuel contamination by visually checking the fuel for water and debris. Clear cup with a reinforced steel pin that works with most aircraft.

Designed to let you drill safety wire holes in bolts on center without damage to the bolt or drill. Just thread the bolt to the required depth and drill through the 1/16" pilot hole. Works with: #8, #10, 1/4", and 5/16" in both UNC and UNF threads.

1/4" & 3/8" Drive Micro Gearless Ratchet Set - 2-Pc Chrome-Molybdenum Steel. Gearless ratchet design for smooth operation and less than 3 degree sweep make these ratchets ideal for confined areas. Re-usable storage tray.

Flush head. Body length: 1/2". body diameter: 1/2". can be used in hand squeezer or block set. Made out of stressed steel. Standard 3/16" (.187) shank

These plastic abrasive particle-filled products remove 1/16 in or less of sealants, silicones, RTVs and adhesives from most surfaces but not the underlying paint or other coating. That means less time for rework.

Some aircraft applications create an environment that does not allow adequate clearance to get a torque wrench or even an open-end wrench around the install nut on oil filters. Even though Tempest has recently introduced the Dash II filter, which is the s

Shank diameter: .110-.128". overall length: 2-1/4". taper: 1/4" per foot. Used for cutting, trimming and routing