#30 drill stop. Overall length 1-5/16". Used to stop the drill bit after reaching a preset depth.

The ClampTite tool can be used with various sizes of wires, eliminating space and strength issues often encountered with screw-operated worm-gear type clamps. Custom clamps that are any size, any shape and can be used anywhere!

Designed for Maintenance Technicians (AMTs or A&P mechanics), IA-qualified mechanics, and students to log training and educational requirements, work performed, and experience for the purpose of tracking for future certification, recurrency, employment ap

High Shear Rivet Punch, 1/8" Dia., 3-3/8" long. Uses a standard .401 rivet gun to remove High Shear and Huck rivets.

Size: 1/8". Deburrs the front, back or both sides of a hole in one pass. Works with any drill. Adjusts easily by turning a set screw in the shank to control the depth of cut.

The Sanding Detailer tools are exciting new sanding sticks that were specifically developed for those hard to reach sanding jobs. Unlike other sanding products, the Sanding Detailers give you 3 different working surfaces.

Reams both the inside and outside edges of 3/16" to 1-1/2" diameter tubes with the aid of three hollow ground cutters. Works with any type of metal, including aviation grade stainless steel.

Some aircraft applications create an environment that does not allow adequate clearance to get a torque wrench or even an open-end wrench around the install nut on oil filters. Even though Tempest has recently introduced the Dash II filter, which is the s

3" reach by 1-1/4" gap opening Close Quarters Yoke is designed to get into tight areas. The upper anvil will fit into an opening as small as 1.25" diameter. Fits ATS-114C, ATS-214C, and Chicago Pneumatic 0214C series compatible squeezers.

Size 4" to 4-1/2", 120 Grit Silicon Carbide. For cylinder bore reconditioning. Provides proper finish for cylinder wall breaking without expensive fixtures.

This set allows rivet gun to be offset, however it is more difficult to drive rivets than the straight version. Spring loaded plastic (delrin) collar. 12" long with .401 shank.

4oz Medium Paste. Boelube® is a specially formulated lubricant patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades, taps & dies, boring tools, and any other application where smooth cutting action is required.