The world is held together with nuts, screws and bolts, which will need to be maintained, repaired, or replaced. Stripped, rusted, or rounded, the VamPLIERS screw remover is the perfect tool for every maintenance, repair & operation toolbox.

Brass, 3/16" Dia, 0"-1/4" Grip. Stubby Cleco is only 1.5" (38mm) high from end to end. Use it to get into tight areas and temporarily hold sheet metal sections in place prior to riveting. Requires cleco pliers (p/n 131).

The McFarlane seat roller housing gauge is designed to help you comply with the Cessna Seat Roller Housing Inspection as mandated by FAA AD 2011-10-09.

Size: 1/8". Deburrs the front, back or both sides of a hole in one pass. Works with any drill. Adjusts easily by turning a set screw in the shank to control the depth of cut.

High Shear Rivet Punch, 1/8" Dia., 3-3/8" long. Uses a standard .401 rivet gun to remove High Shear and Huck rivets.

This chuck is only 1 inch long with a capacity of 0 to 5/32 inches. It includes a 1/4-28 thread adapter so that you can attach it to most angle drills, or right angle drilling aids.

3" reach by 1-1/4" gap opening Close Quarters Yoke is designed to get into tight areas. The upper anvil will fit into an opening as small as 1.25" diameter. Fits ATS-114C, ATS-214C, and Chicago Pneumatic 0214C series compatible squeezers.

Bends 3/16", 1/4", 5/16" & 3/8" tubing. For making up to 90° and offset bends. Accepts aluminum, copper, mild steel and other metal tubing. Not recommended for stainless steel (see p/n 470FH). Manufactured in USA by Imperial.

#30 Diameter, 1/4-28 thread. The unique "high-hook" design of these countersink cutters allows smooth, easy cuts with virtually no chatter. Body diameter is 1/2. They will fit into a stop countersink or they can be used directly with an angle drill. Suita

Some aircraft applications create an environment that does not allow adequate clearance to get a torque wrench or even an open-end wrench around the install nut on oil filters. Even though Tempest has recently introduced the Dash II filter, which is the s

Hastings Quick Change Bands are a fast and efficient way to install piston rings on all types of engines. Use them with the Hastings Ring-O-Matic Pliers (p/n 1670). Fits piston sizes: 5-1/2" to 5-3/4".

Powerful full-ratcheting crimper with safety release and adjustable crimp pressure. Very comfortable rubber handles and ergonomic design makes it easy to install multiple terminals. Crimps BNC, TNC Mini-UHF, RG-58, 141, 142, etc.