Showcase

ATS PRO DIFFERENTIAL PRESSURE TESTER KIT

This time-saving kit includes our top of the line 2EM Differential Pressure Tester and the new 18MM-XT Spark Plug Port Extender for effortless leakdown testing at a great value.

Price: $160.25
Showcase

MINI RIVETING KIT (3X PRO GUN)

This is an excellent kit for those who only need to do occasional riveting work. It contains the essentials to get the job done without any of the extras you may not need.

Price: $235.75
Showcase

ATS PRO 90 DEGREE HEAVY DUTY ANGLE DRILL

Heavy duty 90 degree air drill operates at 3500RPM and delivers .33HP. Uses 1/4x28 threaded bits and accessories. Compact head design (1.07" high x .66" dia) accepts up to 1/4" bits. Ideal for extremely close-quarter areas.

Price: $416.25
Showcase

ATS PROFESSIONAL RIVETING KIT (3X)

Professional Riveting contains everything needed for riveting. Complete kit includes ATS-3X Pro Riveting gun plus: 4 bucking bars, 5 Straight Rivet Sets, 4 Offset Rivet Sets, Custom Molded Case, and more...

Price: $310.25
Showcase

DELUXE IGNITION TIMING KIT

Includes the ATS E50A Mag Synchronizer, E5A High Voltage cable tester, Mag Locks, and P-Lead adapters to perform magneto synchronization and ignition quality checks quickly and reliably.

Price: $365.25
Showcase

DUAL SUPER DUTY RIVET SQUEEZER KIT

We would like to introduce our new Dual Squeezer Kit! This kit features everything our popular SDRS-KIT has but instead of just a 3" yoke we added the whole 3" squeezer! Now you will get our best selling Stainless Steel Rivet Squeezer with a 1 1/2" yoke,

Price: $376.25

1513-1524 of 2261 results

Sort By
<1…126127128…189>

2261 matches for Today's Featured Products.

MANDREL, REPLACEMENT 6-32

SKU: 39254

MANDREL, REPLACEMENT 6-32 (39254)
6-32 replacement mandrel for P/N 39213 RiveNut Kit
Price:$18.95 Sale:$16.75
DRILL EXTENSION (7")

SKU: 387

DRILL EXTENSION (7) (387)
7" Overall Length Drill Extension. Used to extend drill bits, pilot cutters, etc. 1/4" shank on one end for air or electric drill and 1/4"X28 internal thread.
Price:$8.95 Sale:$7.75
3M™ GRAPHICS REMOVAL WHEEL

SKU: 3M7498

3M™ GRAPHICS REMOVAL WHEEL (3M7498)
The new 3M Stripe-Off Graphics Removal Wheel is great for removing stripes, decals, or tail numbers from airplanes without damaging the paint finish. Comes ready to use in any air or electric drill. Includes complete instructions. 4" dia x 5/8" wide.
Price:$60.95 Sale:$55.25
GRABIT® DRILL-OUT® BROKEN BOLT EXTRACTOR (4 PIECE KIT)

SKU: 4017P

GRABIT® DRILL-OUT® BROKEN BOLT EXTRACTOR (4 PIECE KIT) (4017P)
Drill-out is a drill-bit and extractor in one tool. It drills into broken bolts on center and extracts them cleanly using the power of the drill. Four (4) piece kit includes bits to remove 1/4" - 1/2", and M6 - M12 bolts.
Price:$54.95 Sale:$49.25
AIRCRAFT COUNTERBORE

SKU: 4000-17

AIRCRAFT COUNTERBORE (4000-17)
Aircraft Counterbore, 3/4" Dia., 3/16" Pilot Hole, 2-3/4" Len. Made of High Speed Steel. Requires 1400P series pilot.
Price:$55.95 Sale:$50.25
CALIPER

SKU: 3324

CALIPER (3324)
Inside calipers are fully hardened and heat treated. Brushed finish. Size 4".
Price:$15.95 Sale:$14.25
1/4" RIVET SET 10" LONG

SKU: 470-10-1/4

1/4 RIVET SET 10 LONG (470-10-1/4)
Rivet Set, Straight, 1/4" Universal head, 10" Long, .401 Shank
Price:$20.95 Sale:$18.75
3/32" STUBBY RIVET SET

SKU: 470-2-3/32

3/32 STUBBY RIVET SET (470-2-3/32)
Rivet Set, Straight, 3/32" Universal head, 2" Long, .401 Shank
Price:$12.95 Sale:$11.50
3/16" HOLLOW CUTTER

SKU: 493C-3/16

3/16 HOLLOW CUTTER (493C-3/16)
Hollow cutters are designed to cut away swagged or threaded collars from fasteners so that the fastener pin can be easily removed. Hollow cutters are ideal for removing Hi-Shear® rivets.
Price:$9.95 Sale:$8.75
DRILL COLLET (SHANK GRIP), #10 SIZE

SKU: 503C-10

DRILL COLLET (SHANK GRIP), #10 SIZE (503C-10)
Adapts standard drill bits for use with 1/4-28 threaded drills. Includes both collet and collet adapter. Overall of length of 1.125". #10 wire drill size.
Price:$6.95 Sale:$6.25
DIMPLE PUNCH (3/16" AN426 x 1/4" L)

SKU: 4266P-2

DIMPLE PUNCH (3/16 AN426 x 1/4 L) (4266P-2)
Punch Only. 100 Degrees for use with 3/16" AN426 Rivets. Body length: 1/4". Body diameter: 1/2". Can be used in hand squeezer or block set. Made of stressed steel. Standard .187" (3/16") shank.
Price:$14.95 Sale:$13.25
PLEXIGLAS DIRLL BIT (9/64")

SKU: AC55-9/64

PLEXIGLAS DIRLL BIT (9/64) (AC55-9/64)
9/64" (0.1406) diameter, 2" Flute Length. Zero-degree rake, a 90-degree point, and parabolic cutting flutes to drill through Plexiglas, and acrylic plastics without binding or "breaking out."
Price:$12.95 Sale:$11.50
<1…126127128…189>