5/16" Dia, 5/32" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

7/16" Dia, 3/16" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

3/8" Dia, 5/32" Pilot Hole. Made of High Speed Steel. Requires AT404 series pilot.

Aluminum Head Peening Tool, 3" long. This versatile tool is great for forming sheet metal, driving pins, loosening bolts, etc. Works just like a mallet, but with a lot more control. Fits into any standard .401" rivet gun or air hammer.

On page 9-99 of the RV14 plans, between #6 & #7 there is a NOTE to taper the pilot of a #40 countersink cutter per figure 4 to aid in the countersinking of the holes in the angled trailing edge wedge. We now offer a #40 countersink cutter with the pilot

One gauge measures -3, -4, -5, & -6 rivets. Used to check for proper length of rivets BEFORE setting. Eliminates measuring and guessing of rivet lengths. Works for both universal and flush head rivets. Made in USA by Avery Enterprises.

The Select-A-Bit Multi-Driver is a solidly constructed tool that replaces 16 screwdrivers. It includes a set of double ended bits in sizes: Hex 3/32", 1/8", 5/32", 3/16"; Torx 15, 20, 25, 30; Phillips 0, 1, 2, 3; Slot 1/4", 3/16"; Square 2, 3.

AN 450 Tubular cupping with a .401 shank set size “straight”.

Solid Aluminum Universal Head Rivets. Medium hardness (AD). 3/16" diameter by 1/2" long. 1/4 lb package.

Solid Aluminum Universal Head Rivets. Medium hardness (AD). 5/32" diameter by 3/8" long. 1 lb package.

#6 Flush Dzus Flaring Tool for installing flare type grommets. This tool is required when installing flare type grommets. Each series requires it’s own size. Complete instructions and diagrams included.

Set of 5 pins for 5/16" holes. These pins are great for aligning overlapping holes. Just place the pin in the drilled hole of the lower sheet with the point facing up, then carefully place the overlapping sheet in place and tap lightly with a mallet.