Mechaid safety springs (also called Quick Release springs) are used to retain FLUSH and other large diameter rivet sets. The open end fits around the barrel of the rivet and holds it securely. Fits most rivet guns.

Designed to let you drill safety wire holes in bolts on center without damage to the bolt or drill. Just thread the bolt to the required depth and drill through the 1/16" pilot hole. Works with: #8, #10, 1/4", and 5/16" in both UNC and UNF threads.

Speed up your hole deburring using your rechargeable cordless screwdriver or drill for deburring or countersinking.

Superior for back riveting flush rivets without damage to the skin surface. Spring loaded plastic guard holds down skin while riveting. Can also be used for "straight" riveting of flush rivets. Made in U.S.A.

Exposure to CO may cause sickness, headaches, or even death. This Carbon Monoxide Detector can save a pilot’s life, especially when flying with the heater on, by warning of the presence of CO in the cockpit.

Taper diameter from 0.4474" to 0.6145". Brown & Sharpe taper reamer. Flute length: 4". Overall length: 6-3/8". Straight Shank - Straight Flute.

6" long. An ATS exclusive product. Uses any electric or air drill to twist safety wire. Makes left and right handed twists with a reversible drill. Reliable and completely effective.

For AN8 Screws. Cuts ring around paint so that the screw may be removed without cracking the paint. 1/4-28 threaded end fits into most angle drills, or get the optional arbor (p/n PA36-666) for use in a standard drill chuck. Doesn't work on domehead rivet

Bends 3/4" diameter aluminum and copper tubing. Bend radius is 3". Open side type which slips over tube at any point. Makes smooth short radius bends up to 180°.

1/4" & 3/8" Drive Micro Gearless Ratchet Set - 2-Pc Chrome-Molybdenum Steel. Gearless ratchet design for smooth operation and less than 3 degree sweep make these ratchets ideal for confined areas. Re-usable storage tray.

Use this microstop in those tight areas that can't be reached by a standard cage. It's only 1-3/8" long, and threads onto any drill with a 1/4-28 threaded shaft. Features bronze bearings.

Small enough to fit in the palm of your hand, but provides enough leverage to tighten or loosen even the most stubborn nut. Features a ratcheting box end to ensure access to the tightest areas. 7 piece set. Flex Head.