Brass, 3/16" dia., Extra long 0-1" grip. For applications requiring a high-clamping force. These fasteners can be adjusted to deliver from zero to 300 lbs. Perfect for all types of metallic and composite materials.

Compact stubby deburring tool easily reaches tight areas. Sharp cutting head removes burrs from cut pipe with up to a 3/4” inner diameter, as well as drilled holes in sheet metal up to 1/2” diameter.

A great tool to quickly and safely remove WEMAC eyeball cabin light & air vent housings for servicing. No more damage to the housing when removing. Manufactured with high friction elastomer tip for maximum grip.

Special design enables you to drill safety wire holes through the head of bolts or through nuts, across the diagonal. Accepts up to 3/4 inch diameter nuts and bolts. Drills 1/16" hole.

This handy Safety Wire Twister has been a workhorse tool since the early days of aviation. Also called a "wire driver," it's simple, elegant screwdriver-like design makes it easy to use with excellent results. 12" Extra Long.

Mechaid safety springs (also called Quick Release springs) are used to retain FLUSH and other large diameter rivet sets. The open end fits around the barrel of the rivet and holds it securely. Fits most rivet guns.

Accepts any dimple die or rivet squeezer with a 3/16” (.187) shank. A great resource when you need to do work in areas where a rivet squeezer will not work. The driver has a .401 shank to fit a standard rivet gun.

A 10X magnifying loupe of the highest optical quality with excellent resolution and perfect illumination. This is the type of tool is recommended by spark plug manufacturers such as Champion for the inspection of spark plug firing end insulators.

Used to install standard #6 two lug double-wing style plate nuts (DWS).

3/32" dimple size. 1" reach. Uses standard dimple die with .187" shank (see our 4263DP-X series). If you've been looking for a safe and economical way to make dimples, then this is the tool for you!

Spacer shims are used with Compression Riveters to produce a precise rivet gap spacing. The correct gap spacing will produce consistent and uniform results. contains 2 each of the following shim sizes: 1/64", 1/32", and 1/16".

The valve tappet clearance gauge checks the minimum (.028”) and maximum (.080”) clearance gap between the rocker arm and the valve stem cap when the lifter (tappet) is dry and fully collapsed. The blades are ground and polished to precisely .080” and .028