Diameter .041, 1 Lb.Can, Type 302. Stainless steel annealed, used to secure bolts, nuts or hardware subject to vibration. Comes in no waste 1 lb. dispenser cans. Type 302. MS-20995C; MIL-W-6713. 6713.

Our newest Rivet Squeezer Kit contains everything you’ll ever need to tackle any riveting job. You get our popular ATSRS Rivet Squeeze, plus three yokes in sizes 1", 2" and 3". We’ve also thrown in our 6 Piece Squeezer Set.

Holds Timing Gears When Removed. Works with all bendix magnetos

Yoke, Squeezer, 5-5/8" Deep, 1-3/16" High. Fits ATS-114C and Chicago Pneumatic 214C squeezers.

Our own ATS brand tester comes complete with on-off safety valve to eliminate hose pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushings, etc.

An environmentally friendly biodegradable heavy duty cleaner for the removal of baked on carbonaceous soils, oils and greases. Can be diluted from 1:5 to 1:20 and heated to accelerate cleaning. Safe for most metals and plastics. Non-hazardous. 1 Gallon.

For engines with bore diameters over 5" per FAA AC43-13. Includes on-off safety valve to eliminate hose pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushing

These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures uniform pressure by eliminating hand tightening. 1" reach. 0-3/4" capacity. Provides 70 lbs. of clamping pressure. Uses standard Cleco Pliers.

HANSEN quick connect fitting. The Semco 250A series dispense guns require the use an air hose with a B-nut fitting (to attach to the Semco gun) and a quick connect attachment. Each hose is 5 ft (1.5m) long.

This tool takes all the work and risk out of removing the piston pin. It works on lycoming and Continentals engines. Just slip it over the piston, turn the shaft and it pushes the pin out.

Tandem ATS Alligator Squeezer delivers twice the force of a standard unit at the same pressure. Squeezes up to 3/16" aluminum and steel rivets. Jaws have a 1-1/2" reach and a 1-5/8" opening gap. Accepts all squeezer and dimple snaps with a .187" shank.

The Cherry G784 Hydro-Shift Riveter is a pneumatic-hydraulic tool designed for the efficient installation of CherryLOCK® Rivets. It will install nearly all diameters of CherryLOCK® Rivets up to a half-inch grip. NSN: 5130-00-935-4681