This straight forward tool will let you remove the tach seal in minutes time and time again. The seal removal tool is so easy to use, it’s as easy as counting to five!

Our new Avionics Maintenance Kit has all of the essential tools to work on every aspect of aircraft electronics systems. Whether it’s a simple electrical repair or a complete system rewire.

This tool takes all the work and risk out of removing the piston pin. It works on lycoming and Continentals engines. Just slip it over the piston, turn the shaft and it pushes the pin out.

HANSEN quick connect fitting. The Semco 250A series dispense guns require the use an air hose with a B-nut fitting (to attach to the Semco gun) and a quick connect attachment. Each hose is 5 ft (1.5m) long.

6oz polyethylene cartridge. Semco disposable cartridges are molded from high density polyethylene, which makes them capable of handling a wide variety of chemical fluids for storage and application.

Diameter .041, 1 Lb.Can, Type 302. Stainless steel annealed, used to secure bolts, nuts or hardware subject to vibration. Comes in no waste 1 lb. dispenser cans. Type 302. MS-20995C; MIL-W-6713. 6713.

Set includes 4 of our most popular sizes of bucking bars: 142, 147, 148, and 149.

New 3882-series Cylinder Base Nut Wrenches feature a 12-point thin-walled hex head, and a 15" span for use with any Continental and newer Lycoming engines.

For engines with bore diameters over 5" per FAA AC43-13. Includes on-off safety valve to eliminate hose pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushing

A complete set of dimples & dies to work with Flush Rivets (AN426) in sizes: 3/32", 1/8", 5/32", and 3/16".

These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures uniform pressure by eliminating hand tightening. 1" reach. 0-3/4" capacity. Provides 70 lbs. of clamping pressure. Uses standard Cleco Pliers.

Jiffy style Corner Rivet Gun gets into tight places that are beyond the reach of a conventional X-Gun. Uses special "stubby" rivet sets to deliver the same force as a 3X riveter in a gun that’s only 4" long.