For wire sizes AWG18 to AWG30. Powerful full-ratcheting crimper with safety release and adjustable crimp pressure. Crimps Open Barrel Terminals such as D-Subminiature, Amp, Molex, Etc.

Powerful ratcheting crimper makes short work of attaching terminals to heavy gauge wires and cables in sizes AWG 8, 6, 4, and 2. Features high leverage handles to provide superior mechanical advantages.

When overlapping two pieces of sheet metal, you must "jog" the edge of one sheet so that they will join together seamlessly - and that’s just what this tool does. The jogging die places a nice 1/2" jogging flange on the edge of sheet metal up to 16ga.

Replacement Mandrel, 6-32, For C50-6000 Drivers

The original Crescent Wrench (aka Monkey Wrench, aka Ford Wrench, aka Spud Wrench). It’s the mechanics tool of choice for removing and installing "B" nuts. 18" Long.

#30 size. Used with DH01 drill housing.

Used for electrical insulation, bundling and wire identification purposes. Slides easily over small inline splices and connectors. Can shrink down to 50% of its original diameter to fit snugly over any wire.

Schauer’s intelligent charger design follows the battery impedence to the end of the charge cycle for all battery types, thus ensuring a full charge with virtually no danger of overcharging or cooking the battery. 12 volts at 5 amps with battery clips.

Schauer’s intelligent charger design follows the battery impedence to the end of the charge cycle for all battery types, thus ensuring a full charge with virtually no danger of overcharging or cooking the battery. 24 volts at 5 amps with battery clips.

Five piece extractor set designed to remove broken screws and bolts. Easy to use, just drill a pilot hole, insert the extractor and twist out the screw.

4 to 1 ratio nosepiece turns four times with each turn of the handle. Accepts any 1/4" bit. Includes a set of bits in sizes: Hex 3/32", 1/8", 5/32", 3/16"; Torx 15, 20, 25, 30; Phillips 0, 1, 2, 3; Slot 1/4", 3/16"; Square 2, 3

If the installation hole of your Camloc/C-Spec (MS4002 series) is worn out, you must use an oversized hole and retainer. This tool will simplify the process of installing such retainers.