CAMLOC HOLE ENLARGER (4000 SERIES)
Provides proper rivet hole spacing and alignment, and is used to precisely enlarge the center hole to accept the MS245 (4000 Series Camloc) Adjustable-Depth Receptacle. First, the MS-DT-4 Template is used to drill the pilot-holes, then this template is used to enlarge the center hole for a perfect fit every time. 1 lbs (0.5Kg) shipping weight.
You might also be interested in...
May we recommend the following accessories to get the most from your selected product? Include any of these items with your purchase by entering the desired quantity before cicking any of the Add To Cart buttons.
SIDE GRIP FASTENER (1")
SKU: 26EL
These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures uniform pressure by eliminating hand tightening. 1" reach. 0-3/4" capacity. Provides 70 lbs. of clamping pressure. Uses standard Cleco Pliers.
Price:$2.95
AIRLOC CROSSPIN INSTALLATION TOOL
SKU: MS-ALP
This tool accommodates the two common series (diameters) of Airloc (A-Spec) studs #2 and #5. Each series has a hole for the stud to be placed in so that the cross pin can be easily and accurately installed.
Price:$52.95
CAMLOC DRILL TEMPLATE (2600/2700 SERIES)
SKU: MS-DT2
Drill Template provides the proper hole spacing and alignment for the MS213 (2600/2700 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel.
Price:$4.95
CAMLOC DRILL TEMPLATE (4000 SERIES)
SKU: MS-DT4
Provides the proper hole spacing and alignment for the MS245 (4000 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel.
Price:$4.95
Your Recent Views
.jpg)
.jpg)
Save 5% NOW!
Sign up to get your personal discount code.
Copyright 2024 - Aircraft Tool Supply Company