CAMLOC DRILL TEMPLATE (4000 SERIES)

CAMLOC DRILL TEMPLATE (4000 SERIES) (MS-DT4)

SKU: MS-DT4

Category: Sheet Metal Fasteners

Price:$4.95
Provides the proper hole spacing and alignment for the MS245 (4000 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel. After using this template to drill the pilot-holes, the MS-DT-4B Template is then used to enlarge the center hole for the MS245 Receptacle. 1 lbs (0.5Kg) shipping weight.

You might also be interested in...

May we recommend the following accessories to get the most from your selected product? Include any of these items with your purchase by entering the desired quantity before cicking any of the Add To Cart buttons.

SIDE GRIP FASTENER (1/2")

SKU: 24EL

SIDE GRIP FASTENER (1/2) (24EL)
These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures uniform pressure by eliminating hand tightening. 1/2" reach. 0-3/4" capacity. Provides 70 lbs. of clamping pressure. Uses standard Cleco Pliers.
Price:$2.95
CAMLOC DRILL TEMPLATE (2600/2700 SERIES)

SKU: MS-DT2

CAMLOC DRILL TEMPLATE (2600/2700 SERIES) (MS-DT2)
Drill Template provides the proper hole spacing and alignment for the MS213 (2600/2700 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel.
Price:$4.95
CAMLOC HOLE ENLARGER (4000 SERIES)

SKU: MS-DT4B

CAMLOC HOLE ENLARGER (4000 SERIES) (MS-DT4B)
Provides proper rivet hole spacing and alignment, and is used to precisely enlarge the center hole to accept the MS245 (4000 Series Camloc) Adjustable-Depth Receptacle. First, the MS-DT-4 Template is used to drill the pilot-holes, then this template is us
Price:$4.95