AIRLOC CROSSPIN INSTALLATION TOOL

SKU: MS-ALP

Category: Sheet Metal Fasteners

Price:$52.95

This tool accommodates the two series (diameters) of Airloc (A-Spec) studs commonly found in Beechcraft and Raytheon aircraft: #2 and #5. It has a seat for each series so the cross pin can be installed and centered and operates by placing the pin into the appropriate hole where it should remain seated. Then compress the pliers to force the cross pin into the stud. Once completely clamped, the pin will be perfectly centered in the stud. Comes with complete instructions.

This product is the manufacturer's replacement of their now discontinued MS-ALPT Installation/Removal Tool

1 lbs (0.5Kg) shipping weight.

You might also be interested in...

May we recommend the following accessories to get the most from your selected product? Include any of these items with your purchase by entering the desired quantity before cicking any of the Add To Cart buttons.

CAMLOC DRILL TEMPLATE (2600/2700 SERIES)

SKU: MS-DT2

CAMLOC DRILL TEMPLATE (2600/2700 SERIES) (MS-DT2)
Drill Template provides the proper hole spacing and alignment for the MS213 (2600/2700 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel.
Price:$4.95
CAMLOC DRILL TEMPLATE (4000 SERIES)

SKU: MS-DT4

CAMLOC DRILL TEMPLATE (4000 SERIES) (MS-DT4)
Provides the proper hole spacing and alignment for the MS245 (4000 Series Camloc) Adjustable-Depth Receptacles, and ensures that the rivet and center holes are accurately drilled into the panel.
Price:$4.95
CAMLOC HOLE ENLARGER (4000 SERIES)

SKU: MS-DT4B

CAMLOC HOLE ENLARGER (4000 SERIES) (MS-DT4B)
Provides proper rivet hole spacing and alignment, and is used to precisely enlarge the center hole to accept the MS245 (4000 Series Camloc) Adjustable-Depth Receptacle. First, the MS-DT-4 Template is used to drill the pilot-holes, then this template is us
Price:$4.95